Drill Powered Pulley – Fire Version

It is an ascender driven by an electric drill and also a manual descender. It can be connected to an electric drill to provide lifting power. It can be used for efficiently pulling, holding, lifting and lowering persons.

Note: This product has a built-in self-locking mechanism that activates in the event of gear failure. In the event of internal gear failure, the device will lose its oneway locking function, and the wheel will rotate freely. After falling approximately 10 cm, the self-locking mechanism engages, locking the wheel and clamping the rope to stop further uncontrolled descent.

⚠Warning: After the self-locking device is activated, persons should be carefully lowered to the ground. Subsequently, stop use of this equipment immediately and scrap it, or return it to the factory for repair.

1. This product is mainly used to lift or lower persons.

2. This product is equipped with a hexagonal interface and an adapter shaft (8 mm or 5/16"). To lift persons, use an electric drill to turn the adapter shaft clockwise, counterclockwise rotation is idle.

3. Use in environments with chemical hazards such as seawater or corrosive liquids and gases will lead to a reduced product lifespan. This can cause safety hazards, the product should not be used in the above environments.