Rope retracing pulley
Rope Retracting Pulleys can be driven by a electric drill to wind up ropes: H1/H3 can wind up one rope, and H2 can wind up two ropes at the same time. H1 is a single pulley; The two pulleys of H2 rotate synchronously and cannot be used as double pulleys to form a mechanical advantage system; H3 is a double pulley.
H series Rope Retracting Pulleys can be driven by a electric drill to wind up ropes: H1/H3 can wind up one rope, and H2 can wind up two ropes at the same time.
H1 is a single pulley; The two pulleys of H2 rotate synchronously and cannot be used as double pulleys to form a mechanical advantage system; H3 is a double pulley.
1. This product is used to wind up the rope, and can be used as a pulley.
2. This product is equipped with a hexagonal interface and an adapter shaft (8 mm or 5/16"). According to the rope winding direction on the product, use an electric drill to retract the rope. When rotating in the opposite direction, the rope pulley will slip and cannot retract the rope.
3. Use in environments with chemical hazards such as seawater or corrosive liquids and gases will lead to a reduced product lifespan. This can cause safety hazards, the product should not be used in the above environments.
It is a rope pulley capable of rope retraction.
Recommended Combinations
The following products belong to the same related group and can meet the composite protection requirements of different scenarios.
No related matching products available for this product.